Ultimaker S5

Ultimaker S5

Powerful, reliable, versatile 3D printing

Discover the easy-to-use desktop 3D printer with a large build volume that delivers accurate, industrial-grade parts, time and again. With simple setup, high uptime, and reliable dual extrusion, Ultimaker S5 is the complete professional 3D printing solution.

£6,230.00 (inc. VAT)


A little bit about the Ultimaker S5

Build Volume

33 x 24 x 30 cm


X, Y: 6.9 microns (0.069mm), Z: 2.5 microns (0.0025mm)

Layer Height

20 microns (0.02 mm) – 200 micron (0.2m)


12 months


Hover on the numbers to see the features

Ultimaker S5

Large Touch Screen Display

A 4.7-inch (11.9 cm) touch display makes operating the 3D printer effortless, displaying visual guides to explain configuration changes and maintenance, plus a visual preview of your print.


Bigger Build Volume

A build volume of 330 x 240 x 300 mm (13 x 9.4 x 11.8 inches), combined with Ultimaker’s reliable dual extrusion and water-soluble support, gives even more freedom to realize your designs or print multiple parts in one go so you can meet demand with maximum efficiency, while fitting comfortably on your desk.


Enhanced Reliability

Active bed leveling ensures a perfect first layer, a closed front controls airflow, and a filament flow sensor will pause your print and notify you if you run out of material. Trust the S5 to do its job while you do yours.


Fast Setup, High Uptime

With Ultimaker’s unique print core design, swap nozzles in seconds to switch between build and support materials, or choose from 0.8, 0.4, or 0.25 mm print cores for fast or detailed prints.


Designed To Connect

The Ultimaker S5 auto-detects material and print core configuration, while over-the-air firmware upgrades make adding the latest features simple. Print over Wi-Fi, Ethernet, or from a USB stick, and monitor progress via the built-in camera.


Sit back and enjoy some videos about this 3D printer

Please subscribe to the Dream 3D YouTube channel…


See what the critics say

the Ultimaker S5 is the ultimate piece of hardware


We found the S5 performed flawlessly, producing prints large and small in a variety of materials

Tom’s Guide

our Editors’ Choice as a professional-grade filament-based 3D printer

PC Magazine

Box Contents

Whats included in the box?

  • Fully assembled & tested Ultimaker S5 3D printer
  • 2x AA Print Cores for Nylon, PLA, ABS, CPE
  • 1x BB Print Core for PVA Support Material
  • Cura (which is downloaded here)
  • Power supply, cable and UK plug
  • Two spools of Ultimaker filament
  • USB Stick
  • Ultimaker Phone App
  • Calibration card to level the build plate
  • Glue Stick
  • Grease
  • Hex Wrenches


Lets get down to detail

Printer and Printing Properties
TechnologyFused Filament Fabrication
Print headDual-extrusion print head with an auto-nozzle lifting system and swappable print cores
Build volumeXYZ: 330 x 240 x 300 mm
(left or right nozzle, or dual extrusion)
Filament diameter2.85 mm
Layer resolution0.25 mm nozzle: 150 – 60 micron
0.4 mm nozzle: 200 – 20 micron
0.8 mm nozzle: 600 – 20 micron
Step accuracy X, Y, Z6.9, 6.9, 2.5 micron
Build speedLess than 24mm3/s
Build plateHeated glass build plate
Heated aluminum build plate (available fall 2018)
Material typesPLA, PVA, ABS, CPE, Nylon
Build plate temperature20 – 100 ºC
Build plate levelingActive leveling
Supported materialsOptimized for: PLA, Tough PLA, Nylon, ABS, CPE, CPE+, PC,
TPU 95A, PP, PVA, Breakaway
Also supports third-party materials
Nozzle diameter0.25 mm, 0.4 mm, 0.8 mm
Nozzle temperature180 – 280 °C
Nozzle heat up timeLess than 2mins
Build plate heat up timeLess than 4 mins (from 20 to 60 °C)
Operating sound50 dBA
Power rating500 W
Material recognitionAuto-recognition with NFC scanner
ConnectivityWi-Fi, LAN, USB port
Display4.7-inch (11.9 cm) color touchscreen
Language supportEnglish, Dutch, French, German, Italian, Japanese, Korean,
Portugese, Russian, Spanish, Simplified Chinese
MonitoringLive camera (view from desktop or app)
Physical Dimensions
Dimensions495 x 457 x 520 mm
Dimensions (with bowden tubes
and spool holder)
495 x 585 x 780 mm
Net weight20.6 kg
Shipping weight29 kg
Shipping box dimensions650 x 600 x 700 mm
Ambient conditions
Operating ambient temperature15 – 32 °C, 10 – 90% RH non-condensing
Non-operating temperature0 – 32 °C
Supplied softwareUltimaker Cura, our free print preparation software
Cura Connect, our free printer management solution
Supported OSMacOS, Windows and Linux
Plugin integrationSolidWorks, Siemens NX
File typesUltimaker Cura: STL, OBJ, X3D, 3MF, BMP, GIF, JPG, PNG
Printable formats: G, GCODE, GCODE.gz, UPF
Warranty and service
Warranty period12 months
Technical supportLifetime support from Ultimaker’s global network of certified
service partners
© Copyright - Dream 3D Ltd
Cookie Policy   Privacy Policy