22.3 x 22.3 x 20.5 cm
Some products that we think would go well with the Ultimaker 2
Hover on the numbers to see the features
The heated bed will ensure that your prints are firmly stuck to the bed when printing and easily removable when the bed has cooled. The bottom of your prints will also be very flat and shiny.
Built In Display & Control Wheel
You can see the status of your print and modify the settings mid print.
Print straight from an SD card so theres no need to connect the printer to your computer if you don’t want to.
Thanks to the fastest controlled horizontal acceleration on the market your prints will be ready quickly (print speed is 30mm/s – 300mm/s).
Low Cost Material
You can use 2.85mm PLA or ABS filament from any manufacturer which keeps the cost of materials down to a minimum.
Large Build Volume
The printer can create objects up to a mazimum size of 23 x 22.5 x 20.5cm
Whats included in the box?
- Fully assembled & tested Ultimaker 2 3D printer
- Cura (which is downloaded here)
- Power supply, cable and UK plug
- One roll of Ultimaker filament (0.75kg)
- Spool holder
- USB cable
- SD card
- Test print carried out on the machine
- Hot End Spare Parts Pack: nozzle, heater block, PTFE coupler, hot end isolator, sprint set screw
- Glue stick
- Hex wrenches
Lets get down to detail
|Layer Resolution||up to 20 microns (0.02mm)|
|Build Volume||22.3 x 22.3 x 20.5 cm|
|Position Precision||X & Y 12.5 microns, Z 5 microns|
|Print Speed||30 – 300 mm/s|
|Travel Speed||30 – 350 mm/s|
|Recommended Filament Diameter||2.85mm|
|Nozzle Diameter||0.4 mm|
|Stand Alone||SD card printing|
|WiFi Printing Ready||Coming soon|
|Software||Cura (Open source)|
|Print Technology||Fused Filament Fabrication (FFF)|
|Frame Dimension (no filament)||X 35.7 cm, Y 34.2 cm, Z 38.8 cm|
|Fame Dimension (with filament)||X 49.2 cm, Y 34.2 cm, Z 55.8 cm|
|Operation Nozzle Temperature||180 – 260° C|
|Operation Heated Bed Temperature||50 – 100° C|
|Ambient Operation Temperature||15 – 32° C|
|Storage Temperature||0 – 32° C|
|AC Input||100 – 240 V / ~4 AMPS / 50 – 60 HZ / 221 watt max.|
|Power Requirements||24 V DC @ 9.2 AMPS|
|Usage Cost||~ €0.05 / cm3 (material and power)|