12 x 12 x 11.5 cm
Some products that we think would go well with the Ultimaker 2 Go
Why choose this 3D printer?
Glass Build Plate
The Ultimaker 2 Go features a glass build plate, however it is NOT heated like on the Ultimaker 2.
Built In Display & Control Wheel
You can see the status of your print and modify the settings mid print.
Print straight from an SD card so theres no need to connect the printer to your computer if you don’t want to.
Thanks to the fastest controlled horizontal acceleration on the market your prints will be ready quickly (print speed is 30mm/s – 300mm/s).
Low Cost Material
You can use 2.85mm PLA filament from any manufacturer which keeps the cost of materials down to a minimum.
Take a closer look
See what the critics say
Whats included in the box?
- Fully assembled & tested Ultimaker 2 Go 3D printer
- Cura (which can be downloaded here)
- Power supply, cable and UK plug
- One roll of Ultimaker filament (0.75kg)
- Spool holder
- USB cable
- SD card
- Test print carried out on the machine
- Hot End Spare Parts Pack: nozzle, heater block, PTFE coupler, hot end isolator, sprint set screw
- Glue stick
- Blue Build Plate Tape
- Hex wrenches
Lets get down to detail
|Layer Resolution||up to 20 microns (0.02mm)|
|Build Volume||12 x 12 x 11.5cm|
|Position Precision||X & Y 12.5 microns, Z 5 microns|
|Print Speed||30 – 300 mm/s|
|Travel Speed||30 – 350 mm/s|
|Recommended Filament Diameter||2.85mm|
|Nozzle Diameter||0.4 mm|
|Stand Alone||SD card printing|
|WiFi Printing Ready||Coming soon|
|Software||Cura (Open source)|
|Print Technology||Fused Filament Fabrication (FFF)|
|Frame Dimension||25 x 25 x 28cm|
|Operation Nozzle Temperature||180 – 260° C|
|Operation Heated Bed Temperature||50 – 100° C|
|Ambient Operation Temperature||15 – 32° C|
|Storage Temperature||0 – 32° C|
|AC Input||100 – 240 V / ~4 AMPS / 50 – 60 HZ / 221 watt max.|
|Power Requirements||24 V DC @ 9.2 AMPS|