Ultimaker 2 Go

Compact, High Resolution Desktop 3D Printer

The Ultimaker 2 Go is a smaller version of the incredibly popular Ultimaker 2 Desktop 3D printer.


“The same great print quality as it’s big brother but in a smaller more affordable package.”


A little bit about the Ultimaker 2 Go

The Ultimaker 2 Go follows on from the success of the top rated Ultimaker 2 which was awarded best in shootout 2015 from Make Magazine and Best Consumer Product at the 3D Print Show global awards 2014.

The mighty mini 3D printer: This compact 3D printer is the perfect solution for makers who want to start with 3D printing on a premium level. This lightweight Ultimaker 2 Go offers a high-quality product with a friendly interface which makes it an ideal starter machine for new users. Through it’s slimmed design, together with its dedicated portable packaging, it is the perfect 3D printer for the maker on-the-go and allows people to use it easily in different contexts.

Build Volume

12 x 12 x 11.5 cm


X, Y: 12.5 microns (0.0125mm), Z: 5 microns (0.005mm)

Min. Layer Height

20 microns (0.02 mm)


12 months (excluding hot end)


Why choose this 3D printer?


Glass Build Plate

The Ultimaker 2 Go features a glass build plate, however it is NOT heated like on the Ultimaker 2.


Built In Display & Control Wheel

You can see the status of your print and modify the settings mid print.


SD Card

Print straight from an SD card so theres no need to connect the printer to your computer if you don’t want to.


Extremely Fast

Thanks to the fastest controlled horizontal acceleration on the market your prints will be ready quickly (print speed is 30mm/s – 300mm/s).


Low Cost Material

You can use 2.85mm PLA filament from any manufacturer which keeps the cost of materials down to a minimum.


Sit back and enjoy some videos about this 3D printer

Please subscribe to the Dream 3D YouTube channel…


See what the critics say

Coming soon

Box Contents

Whats included in the box?

  • Fully assembled & tested Ultimaker 2 Go 3D printer
  • Cura (which can be downloaded here)
  • Power supply, cable and UK plug
  • One roll of Ultimaker filament (0.75kg)
  • Spool holder
  • USB cable
  • SD card
  • Test print carried out on the machine
  • Hot End Spare Parts Pack: nozzle, heater block, PTFE coupler, hot end isolator, sprint set screw
  • Glue stick
  • Blue Build Plate Tape
  • Hex wrenches
  • Grease


Lets get down to detail

Layer Resolutionup to 20 microns (0.02mm)
Build Volume12 x 12 x 11.5cm
Position PrecisionX & Y 12.5 microns, Z 5 microns
Print Speed30 – 300 mm/s
Travel Speed30 – 350 mm/s
Recommended Filament Diameter2.85mm
Nozzle Diameter0.4 mm
Stand AloneSD card printing
WiFi Printing ReadyComing soon
SoftwareCura (Open source)
Print TechnologyFused Filament Fabrication (FFF)
Frame Dimension25 x 25 x 28cm
Operation Nozzle Temperature180 – 260° C
Operation Heated Bed Temperature50 – 100° C
Ambient Operation Temperature15 – 32° C
Storage Temperature0 – 32° C
AC Input100 – 240 V / ~4 AMPS / 50 – 60 HZ / 221 watt max.
Power Requirements24 V DC @ 9.2 AMPS
© Copyright - Dream 3D Ltd
Cookie Policy   Privacy Policy