PrintaFix is specially developed for FDM 3D printing to eliminate warping effective. You do not need any other adhesion agent anymore. PrintaFix is simpler to apply and has superior adhesion qualities compared to all other solutions on the market. The spray may be used on unheated and heated pressure beds.
Easy to Use – Forget toxic acids to dissolve your filament, stop wasting time placing tiny strips of tape to your glass plate. Use PrintaFix and enjoy the simple and easy handling you have waited for! Spray PrintaFix on the printbed, let it dry and start printing without sacrificing performance in any way.
High Performance – Endless hours of perfecting our formula to achieve the easy application we expect from our product without ever losing the necessary performance. The journey is bottled in PrintaFix – the best solution for 3D printing. Superior to our competitors, we can help you with every print.
- Cost-effective application
- Quick and simple application: Shake and spray
- Environmentally friendly unlike hairspray and other solutions
- Removeable with warm water!
How To Use
Preparation – Remove the printbed from the printer. The printbed should be at room temperature and without damage. Remove all dust and residue from previous prints from the printbed. Place it on a table and shake the PrintaFix bottle well for 5 seconds.
Application – Hold the PrintaFix bottle 10cm (4″) away from the printbed. Use enough spray strokes to cover the entire printbed with a thin film of the solution. Overlap spray strokes to prevent uncovered areas that could affect the adhesion. Let it dry for 30 seconds.
Print – Put the printbed back into the 3D printer and level it. Start the print process with our recommended settings. We have tested our product with many materials and settings. Below we provide a list of the settings that achieve the best results with PrintaFix Basic. As we constantly try new materials and 3D printer we will soon update this list to help you choose the perfect temperature for your 3D printer and filament you like to use.
Clean up – When your print has finished remove it carefully with a spatula. Clean up of PrintaFix can be done with warm water or an alcoholic solution. Most window cleaner will work – please check if they contain ethanol.