*Not designed for Phenom MSLA printer
Peopoly’s tough v2 resin, ideal for printing parts that need to stand the wears and the tears. This resin requires at least 30 minutes of post-curing via UV light with the object submerged in water. It is a bit softer and needs more support and higher temperature (>25C) to print well.
Check out a test print made with Tough v2 resin
Tensile Strength 45Mpa
Shore D 84
Young’s Modulus 1500Mpa
Elongation At Break: 30%
Clean with 95% Ethanol