Description
WASTESTREAM TO MAINSTREAM!
ONE PET is a 100% recycled filament made from post-consumer PET plastic bottle waste. This is a stiff and tough material with excellent interlayer adhesion, available in a wide range of colours to suit needs and requirements.
Where our regular PETg has a better impact resistance, ONE PET boasts superior technical properties such as tensile strength, elongation strain at break and tensile modulus.
Please note:PET filaments such as ONE PET are inherently more hygroscopic than other materials – therefore please ensure you keep it dry. Should you need to dehydrate ONE PET we recommend oven-drying at 65° for 24 hours.
Key features:
- High quality PET 3D Printer filament
- Recycled content: 100% (2019 average of all colours of this material; can vary)
- Made from waste PET plastic bottles
- 100% recyclable cardboard spool and packaging
- 750g of material
Settings
1.75mm settings (based on Prusa i3 MK 2)
Extrusion Multiplier: 1.03
Extrusion Width: 0.36
Retraction Distance: 1mm
Layer Height: 0.2
Top Layers: 4
Bottom Layers: 4
Outline: 2
Infill: 20%
Internal Fill Pattern: Grid
Extruder Temp.: 260°
Heated bed: 70°
Fan Speed: 0% (Top layers should have 100% of fan speed)
Nozzle diameter: 0.4mm
2.85mm settings (based on Ultimaker 2+)
Flow: 103%
Extrusion Width: 0.35
Retraction Distance: 1mm
Layer Height: 0.2
Top Layers: 4
Bottom Layers: 4
Wall line count: 2
Infill: 20%
Internal Fill Pattern: Grid
Extruder Temp.: 260°
Heated bed: 70°
Fan Speed: 0% (Top layers should have 100% of fan speed)
Speed: 50 mm/s
Nozzle diameter: 0.4mm
Technical Data Sheet
Please follow the below link to the Technical Data Sheet:
