£38.36Original price was: £38.36.£36.44Current price is: £36.44. (excl. VAT)
An engineering-grade PLA filament, with performance comparable to ABS. Features a heat resistance of 95°C< (after annealing) and the ability to print at speeds up to 120mm/s. ePLA gives a semi-matte finish.
Please scroll down to see full product details 👇
£38.36Original price was: £38.36.£36.44Current price is: £36.44. (excl. VAT)
Product details
Annealing Instructions:
Preheat a convection oven to 110°C / 230°F
When the oven is preheated, quickly put your printed object (tip: Keep the supports attached) in the oven and start a timer.
We recommend placing the object on a flat aluminium sheet or similar.
For small objects with thin walls & medium infill set a 20-minute timer.
For large objects with thick walls & medium infill set a 60-minute timer.
When the object is done annealing, do NOT remove the object, but instead just turn off the oven.
Wait for the oven to cool down to room temperature.
Remove the object from the oven (remove the supports).
Please note:
A higher infill percentage = less shrinkage during annealing
During the annealing process the already high crystalline ePLA material will (rapidly) crystallise further – this means that ePLA will become extra stiff at high temperatures.
The material has been developed for dimensional accuracy both before and after annealing which explains the low shrinkage that you will experience when working with ePLA
Tips
Recommended printing temperature (°C): 235 ± 10
Recommended heated bed temperature: Can be printed without, but if you have one, we recommend 70°C
Storage: Cool and dry conditions, ideally ~20°C
High quality ePLA 3D Printer filament
Recycled content: 50% (2019 average of all colours of this material; can vary)
100% recyclable cardboard spool and packaging
750g of material
Colour ref – 9071(Default = RAL, Numbers with a ‘C’ on the end refer to Pantone)
Technical Data Sheet
Please follow the below link to the Technical Data Sheet: