Filamentive ePLA Black 2.85mm | 750g

Annealing Instructions:

1. Preheat a convection oven to 110°C / 230°F
2. When the oven is preheated, quickly put your printed object (tip: Keep the supports attached) in the oven and start a timer.

• We recommend placing the object on a flat aluminium sheet or similar.
• For small objects with thin walls & medium infill set a 20-minute timer.
• For large objects with thick walls & medium infill set a 60-minute timer.

1. When the object is done annealing, do NOT remove the object, but instead just turn off the oven.
2. Wait for the oven to cool down to room temperature.
3. Remove the object from the oven (remove the supports).

Please note:

• A higher infill percentage = less shrinkage during annealing

• During the annealing process the already high crystalline ePLA material will (rapidly) crystallise further – this means that ePLA will become extra stiff at high temperatures.

• The material has been developed for dimensional accuracy both before and after annealing which explains the low shrinkage that you will experience when working with ePLA

Tips

Recommended printing temperature (°C): 235 ± 10

Recommended heated bed temperature: Can be printed without, but if you have one, we recommend 70°C

Storage: Cool and dry conditions, ideally ~20°C

• High quality ePLA 3D Printer filament
• Recycled content: 50% (2019 average of all colours of this material; can vary)
• 100% recyclable cardboard spool and packaging
• 750g of material
• Colour ref – 9071(Default = RAL, Numbers with a ‘C’ on the end refer to Pantone)

Technical Data Sheet

Please follow the below link to the Technical Data Sheet:

Technical Data Sheet