Photocentric Daylight Resins
Photocentric’s daylight resins provide a full range of end properties from photopolymers highly active in the visible spectrum. Compatible with the Liquid Crystal 10″, Liquid Crystal HR and HR2 only.
Firm Daylight Resin
Very hard with slight compressive ability
No products found which match your selection.
Firm Overview
Firm daylight polymers are ideal for making objects where you want it to be very hard with slight compressive ability under high force. Objects will bend a little and stretch slightly when under duress. They exhibit good tensile shear properties with limited elongation. Objects can only be bent and compressed with considerable force.
Firm Applications
- Car parts such as wing mirror casings
- Bottles and caps
- Modelling
Hard Daylight Resin
Very hard with no compressive ability
No products found which match your selection.
Hard Overview
Hard daylight polymers are ideal for making objects where you want a very hard glass-like object with no compressive ability under high force. They exhibit some shrinkage and are fast curing. Objects will not bend or deflect when under duress. They exhibit very high tensile shear properties, high Vicat softening and almost no elongation.
Hard Applications
- Metal part models such as engine blocks, motors or propellers
- Rattles or toys
- Customised lamps
- Microfluidic devices
Flexible Daylight Resin
Flexible but still hard
No products found which match your selection.
Flexible Overview
Flexible daylight polymers are ideal for making objects where you want flexibility, but still a hard object. Objects will compress and deflect enough to bend and return. They exhibit low tensile shear properties and some elongation. Objects can be bent and compressed with some force.
Flexible Applications
- Handle grips, gearstick handles and overmoulds
- Soft organ medical prototypes
- Cushioning and dampening
- Bicycle saddles
- Shoes and flip flops
- Bottles, phone cases and watch straps
- Wearable prototypes
- Packaging
- Rubber stamps
Tough Daylight Resin
Stiff but good flexibility and strength
No products found which match your selection.
Tough Overview
Tough Daylight polymers are ideal for making objects that are stiff but exhibit good flexibility and strength. Objects will compress and deflect under duress and will return to their original state over time. They exhibit good tensile shear properties with good elongation and little shrinkage.
Tough Applications
- Snap-fit joints
- Phone cases and assemblies
- Handle bars, goggles and high impact objects
- Rugged prototypes
High Tensile Daylight Resin
High strength and low elongation
No products found which match your selection.
High Tensile Overview
High Tensile daylight polymers are ideal for making hard objects that exhibit high strength and low elongation. Objects will not bend or deflect easily when under duress. They exhibit very high tensile shear properties, low elongation, and little shrinkage.
High Tensile Applications
- Car parts such as wing mirror housings
- Glass frames
- Consumer goods
- Microfluidic devices
Castable Daylight Resin
For high definition moulds, leaves almost no ash when burnt
No products found which match your selection.
Castable Overview
Castable daylight resin is specially formulated to provide high definition moulds. It will leave almost no ash when burnt and create gas evenly as the temperature is increased, avoiding any pressure build-up within the casting. It will capture all the details with a very dry surface to provide the ideal finish to your investment mould.
Castable Applications
- Jewellery
Contact Details
Idea Maker – How to apply Textures to your 3d mod...September 30, 2022 - 9:52 am
Replique and BASF Forward AM’s food safe 3D printing process...June 29, 2022 - 7:55 pm
3D Printing Enables Advanced Radiation Medical Treatmen...June 29, 2022 - 7:32 pm
Ultimaker PVA Removal Station – enabling efficient...February 18, 2022 - 9:04 am
If your were asked to pick between the Ultimaker 2 or the...November 12, 2015 - 3:28 pm by Scott Charlson
- Replacement perforated plate being sent direct from Zortrax,...July 8, 2015 - 2:21 pm by James
- Layers slipping - was advised to check grub screwsJuly 8, 2015 - 2:20 pm by James
- problem with printerJuly 8, 2015 - 1:56 pm by James
3D Printing
3D Printing Business Case
3D Printing Composites
3D Printing in Film Industry
cc 0.6 mm red Ultimaker
CES Show
Dental 3D Printing
Injection Moulding
Magna
raise3d
Ultimaker 2 Extended
Ultimaker 2 Go
Ultimaker 3D Printer
Ultimaker print core
Ultimaker S5
Ultimaker S5 Pro Bundle
Zortrax 3D Printer
News & Blog
- Idea Maker – How to apply Textures to your 3d modelSeptember 30, 2022 - 9:52 am
- Replique and BASF Forward AM’s food safe 3D printing process for MieleJune 29, 2022 - 7:55 pm
- 3D Printing Enables Advanced Radiation Medical TreatmentJune 29, 2022 - 7:32 pm
- Ultimaker PVA Removal Station – enabling efficient post-processing with peace of mindFebruary 18, 2022 - 9:04 am
3D-Printed Shoe Uppers Accelerates Small Batch ProductionDecember 6, 2021 - 1:06 pm